ELFa(@+4( -L0p`WPPp@ @0lPW 0-LM S00=41@" d!0 @ 0P0 S0 -L|pP@Q  \`VPL00ssZ0S(,0 T@Xu =?0 0  003S`n `qTVx  00 S `  0PUxPUh00$@00 000PUP,Hx ( -LMpP0Sh0  ^ ^0Sh00SşN @0001@h 000U! 0X 0 0R0S$+PPo@0d`Q0! @0`0S  0 t  0 @ Q@0`@30S00H S? :S0B A SC A0B000S.)) R@N dRKO ]RK@ ZRR@ RKN L@RL n RM KL:0RIL z:0RL:0RK :0RHK OKMxb0ST Dpl2303.c: set_control_lines - value = %d, retval = %d <7>pl2303.c: pl2303_write - port %d, %d bytes <3>pl2303.c: pl2303_write - no tty??? <7>pl2303.c: pl2303_write - already writing <7>%s: %s - length = %d, data = pl2303.cpl2303_write%.2x <3>pl2303.c: pl2303_write - failed submitting write urb, error %d <7>pl2303.c: pl2303_set_termios - port %d, initialized = %d <7>pl2303.c: pl2303_set_termios - no tty structures <7>pl2303.c: pl2303_set_termios - nothing to change... <3>pl2303.c: pl2303_set_termios - out of memory. <7>pl2303.c: 0xa1:0x21:0:0 %d - %x %x %x %x %x %x %x <7>pl2303.c: 0x40:1:0:1 %d <7>pl2303.c: pl2303_set_termios - data bits = %d <3>pl2303.c: pl2303 driver does not support the baudrate requested (fix it) <7>pl2303.c: pl2303_set_termios - baud = %d <7>pl2303.c: pl2303_set_termios - stop bits = 2 <7>pl2303.c: pl2303_set_termios - stop bits = 1 <7>pl2303.c: pl2303_set_termios - parity = odd <7>pl2303.c: pl2303_set_termios - parity = even <7>pl2303.c: pl2303_set_termios - parity = none <7>pl2303.c: 0x21:0x20:0:0 %d <7>pl2303.c: 0x40:0x1:0x0:0x41 %d pl2303_open<7>pl2303.c: pl2303_open - port %d <7>pl2303.c: 0x%x:0x%x:0x%x:0x%x %d - %x <7>pl2303.c: 0x%x:0x%x:0x%x:0x%x %d <7>pl2303.c: pl2303_open - submitting read urb <3>pl2303.c: pl2303_open - failed submitting read urb, error %d <7>pl2303.c: pl2303_open - submitting interrupt urb <3>pl2303.c: pl2303_open - failed submitting interrupt urb, error %d pl2303_close<7>pl2303.c: pl2303_close - port %d <7>pl2303.c: pl2303_close - shutting down urbs <7>pl2303.c: pl2303_close - usb_unlink_urb (write_urb) failed with reason: %d <7>pl2303.c: pl2303_close - usb_unlink_urb (read_urb) failed with reason: %d <7>pl2303.c: pl2303_close - usb_unlink_urb (interrupt_in_urb) failed with reason: %d <7>pl2303.c: get_modem_info - result = %x <7>pl2303.c: pl2303_ioctl (%d) cmd = 0x%04x <7>pl2303.c: pl2303_ioctl (%d) TIOCMGET <7>pl2303.c: pl2303_ioctl (%d) TIOCMSET/TIOCMBIC/TIOCMSET <7>pl2303.c: pl2303_ioctl not supported = 0x%04x <7>pl2303.c: pl2303_break_ctl - port %d <7>pl2303.c: pl2303_break_ctl - turning break %s offon<7>pl2303.c: pl2303_break_ctl - error sending break = %d <7>pl2303.c: pl2303_shutdown pl2303_read_int_callbackpl2303_read_bulk_callback<7>pl2303.c: pl2303_read_bulk_callback - port %d <7>pl2303.c: pl2303_read_bulk_callback - bad serial pointer, exiting <7>pl2303.c: pl2303_read_bulk_callback - urb->status = %d <7>pl2303.c: pl2303_read_bulk_callback - port is closed, exiting. <7>pl2303.c: pl2303_read_bulk_callback - caught -EPROTO, resubmitting the urb <7>pl2303.c: pl2303_read_bulk_callback - unable to handle the error, exiting. <3>pl2303.c: pl2303_read_bulk_callback - failed resubmitting read urb, error %d pl2303_write_bulk_callback<7>pl2303.c: pl2303_write_bulk_callback - port %d <7>pl2303.c: pl2303_write_bulk_callback - Overflow in write <7>pl2303.c: pl2303_write_bulk_callback - nonzero write bulk status received: %d <3>pl2303.c: pl2303_write_bulk_callback - failed resubmitting write urb, error %d <6>pl2303.c: Prolific PL2303 USB to serial adaptor driver v0.9 GCC: (GNU) 3.3.2.symtab.strtab.shstrtab.rel.text.rel.data.bss.modinfo.rodata.rodata.str1.8.comment4 |4H ) % @p /4=xE2P T**]H- " (1Q %"d+Dd^hTll{  TlT\(0lBHX\$\kz `,h    .:HWk,(9x .%Gpl2303.c__module_kernel_versionid_table__module_usb_device_size__module_usb_device_tablepl2303_devicepl2303_startuppl2303_shutdownpl2303_openpl2303_closepl2303_writepl2303_ioctlpl2303_set_termiospl2303_break_ctlpl2303_read_int_callbackpl2303_read_bulk_callbackpl2303_write_bulk_callbackset_control_linesdebugport_paranoia_checkset_modem_infoget_modem_infoqueue_taskpl2303_initpl2303_exit__module_licensekmalloc__memzerousb_control_msgprintk__arch_copy_from_usermemcpyusb_submit_urbudelaykfreetty_std_termios__down_failed__up_wakeup__this_moduleusb_unlink_urb__arch_copy_to_usertty_flip_buffer_pushtest_and_set_bit__tasklet_hi_scheduletq_immediatebh_task_vecusb_serial_registerusb_serial_deregisterinit_modulecleanup_module__module_description__module_parm_debug__module_parm_desc_debug__udivsi3,"@L#`$% (%4<%Td%&#'%(%08%X(d)x%         % lx"%# $0l%$%$%@DPT`dlx$,4%L%Tx%%T$h%p$@%H$%*  +               $ D %p ,  $$ H % $  % $ @ % $  % $$ H % $  % $ 4 % $  % $ $%l$|%$%$%8(HX%l(t%--  .      ,4<HP\p%,,%4/<P%X/`t%|/%-       .ht&|#,x%0  @%PTdh|%%%    %@T%$%     %(4<*H\dh  %$%,4%< @D H L P lx%%(8<LX%`ht%%%%1 8@1L\(dt%|            %$08%L%p(x%23     4556% 7D2Ldh l